Skip to Main Content (Press Enter)

Logo CNR
  • ×
  • Home
  • Persone
  • Pubblicazioni
  • Strutture
  • Competenze

UNI-FIND
Logo CNR

|

UNI-FIND

cnr.it
  • ×
  • Home
  • Persone
  • Pubblicazioni
  • Strutture
  • Competenze
  1. Pubblicazioni

Characterisation of La0.6Sr0.4Co0.2Fe0.8O3-delta - Ba0.5Sr0.5Co0.8Fe0.2O3-delta composite as cathode for solid oxide fuel cells

Abstract
Data di Pubblicazione:
2017
Abstract:
A novel composite electrode, obtained by combining two high performing perovskite materials, such as La0.6Sr0.4Co0.2Fe0.8O3-delta and Ba0.5Sr0.5Co0.8Fe0.2O3-delta, was investigated as promising cathode for intermediate temperature solid oxide fuel cells (IT-SOFCs). The two perovskites possess high catalytic activity for the oxygen reduction (ORR), although some problems related to their chemical and structural stability have still to be overcome in view of improving durability of the cell performance. The purpose of this study was obtaining a stable and high-performing composite material, by mixing the powders through a very simple procedure. In principle, equilibrium at the LSCF-BSCF interface may have been reached due to ions interdiffusion during the sintering treatment (1100°C), resulting in the chemical stabilization of the material. The composite-cathode/Ce0.8Sm0.2O2-?-electrolyte system was then investigated by Electrochemical Impedance Spectroscopy (EIS) as a function of temperature, overpotential and time, exhibiting rather low activation energy for the oxygen reduction reaction (96 kJ mol-1). XRD analysis was performed to detect any structural modification during thermal or operation stages and it was found that after the sintering the two starting perovskites were no longer present, while two new phases were identified: a Co-rich La0.5Ba0.5CoO3 cubic and a Sr-rich La0.4Sr0.6FeO3 rhombohedral phase. The impedance of the composite electrode at 700 °C (0.07 ?cm2 ) appeared higher than for pure BSCF (0.036 ?cm2), but reasonable if compared to the improvement in durability achieved under the considered operating conditions (200 mAcm-2, 700 °C): 5% of impedance degradation over 200 h for the composite, against 38% for pure BSCF over the same aging time and a 29% for pure LSCF over 72 h. The results confirmed the LSCF-BSCF composite as promising system to be further investigation as IT-SOFC cathode.
Tipologia CRIS:
04.02 Abstract in Atti di convegno
Keywords:
SOFC; Cathode; Perovskites
Elenco autori:
Barbucci, Antonio; Carpanese, MARIA PAOLA; Viviani, Massimo; Presto, Sabrina
Autori di Ateneo:
PRESTO SABRINA
VIVIANI MASSIMO
Link alla scheda completa:
https://iris.cnr.it/handle/20.500.14243/330613
  • Dati Generali

Dati Generali

URL

https://sed.iees.bas.bg/bg
  • Utilizzo dei cookie

Realizzato con VIVO | Designed by Cineca | 26.5.0.0 | Sorgente dati: PREPROD (Ribaltamento disabilitato)