Synthesis of a Thin-Film Polyamide-Cellulose Acetate Membrane: Effect of Monomers and Porosity on Nano-Filtration Performance

The present study highlights the influence of support and monomer properties on the performance of thin-film composite (TFC) membranes. For this purpose, a series of polyamide-cellulose acetate thin-film composite nanofiltration (TFC-NF) membranes were prepared by interfacial polymerization technique using cellulose acetate (CA) membrane as support and the monomer of cyclohexane-1,3,5 tricarbonylchloride (HTC) as an organic phase. The effect of the cellulose acetate concentration on the pore size of the membrane support was investigated using 15%, 16.5%, 18%, 19.5%, and 21.5% of cellulose acetate. m-phenylenediamine (MPD), piperazidine (PIP), and 1,3- cyclohexanebis (methylamine) (CHMA) were studied as monomers. Results displayed that PIP/HTC membrane is more hydrophilic and has more intense granular and convex structure with rougher surface compared to the other prepared membranes. The water flow and the porosity depended on the cellulose acetate concentration. The decrease in porosity complied well with permeability, contact angle, and SEM analysis. The membrane performances were evaluated for the retention of NaCl, CaCl, and NaSO retention. Comparing the NaSO rejection with CaCl and NaCl, the former is higher than the latter.