Self-heated Ag-decorated SnO2 nanowires with low power consumption used as a predictive virtual multisensor for H2S-selective sensing

Multisensor systems with low-power consumption are emerging for the Internet of Things. In this work, we demonstrate the use of self-heated networked Ag-decorated SnO2 NW sensors integrated into a portable module for selective detection of H2S gas at low power consumption, and the integrated system is simulated as a virtual multisensor under varying heating powers for identifying and quantifying different reducing gases. The H2S gas-sensing characterisations at the different self-heating powers of 2-10 mW showed that the gas response significantly increased with the increase in Ag density decoration and the heated power strongly affected the gas-sensing performance and sensor stability. Excellent response of 21.2 to 0.5 ppm H2S gas was obtained at a low heating power of 2 mW with an acceptable response/recovery time of 18/980 s. The increase of the heating power over 20 mW can destroy the devices. The integrated system could selectively detect H2S at the heating power below 4 mW and H-2, C2H5OH and NH3 gases at the heating power upon 4 mW. The virtual multisensor could discriminate qualitatively (with an accuracy of 100%) and quantitatively H2S, H-2, NH3, C2H5OH (Ethanol) and CH3COCH3 (Aceton) gases with average errors of 13.5%, 14.7%, 16.8%, 16.9%, and 14.8%, respectively. The proposed sensing platform is a promising candidate for selective detection of H2S gas and virtual mul- tisensor with low power consumption for mobile or wireless network devices. (C) 2019 Elsevier B.V. All rights reserved.