Performance of passive sampling with low-density polyethylene membranes for the estimation of freely dissolved DDx concentrations in lake environments

Laboratory and field studies were used to evaluate the performance of low-density polyethylene (PE) passive samplers for assessing the freely dissolved concentrations of DDT and its degradates (DDD and DDE, together referred to as DDx) in an Italian lake environment. We tested commercially available 25 mm thick PE sheets as well as specially synthesized, 10 mm thick PE films which equilibrated with their surroundings more quickly. We measured PE-water partitioning coefficients (Kpew) of the 10 mm thick PE films, finding good correspondence with previously reported values for thicker PE. Use of the 10 mmPE for ex situ sampling of a lake sediment containing DDx in laboratory tumbling experiments showed repeatability of ±15% (¼ standard deviation/mean). Next, we deployed replicate 10 mm and 25 mmPE samplers (N ¼ 4 for 10 d and for 30 d) in the water and sediment of a lake located in northern Italy; the results showed dissolved DDx concentrations in the picogram/L range in porewater and the bottom water. Values deduced from 10 mm thick PE films compared well (95% of all comparison pairs matched within a factor of 5) with those obtained using PE films of 25 mm thickness when dissolved DDx concentrations were estimated using performance reference compound (PRC) corrections, whether left at the bed-water interface for 10 or 30 days. These results demonstrated the potential of this sampling method to provide estimation of the truly dissolved DDx concentrations, and thereby the mobile and bioavailable fractions in both surface waters and sediment beds.